Product Overview
The AKSA APD360C is a diesel generating set built for dependable standby and prime power use across commercial, industrial, agricultural, construction, workshop, and backup power applications. It delivers 360 kVA / 288 kW standby power and 327 kVA / 261.6 kW prime power, making it suitable for sites that require stable 50Hz, 3-phase electrical supply.
Powered by a Cummins 6LTAA9.5-G1 diesel engine, the APD360C uses a 6-cylinder, 9.5-litre, turbocharged and charge-air-cooled diesel engine running at 1500rpm. The engine features direct fuel injection, electronic governor control, dry-type air filtration, water cooling, and a 24V DC electrical starting system.
The generator is supplied with an Aksa AK 5280 alternator, offering brushless operation, Class H insulation, IP22 protection, MX341 AVR, and 1% voltage regulation. This helps provide stable output for general electrical loads and sensitive equipment used in standby and prime power applications.
Control and protection are handled by the DSE7320 control panel, which monitors generator voltage, current, frequency, battery voltage, engine oil pressure, coolant temperature, running hours, operating status, alarms, and shutdown conditions. The unit includes an integrated base fuel tank and is available in open or canopy configuration for different installation requirements.
Key features
- 360 kVA / 288 kW standby power
- 327 kVA / 261.6 kW prime power
- Cummins 6LTAA9.5-G1 diesel engine
- 400/231V, 50Hz, 3-phase output
- 1500rpm engine speed
- 0.8 power factor
- 6-cylinder, 9.5-litre diesel engine
- Turbocharged and charge-air-cooled
- Water-cooled engine design
- Direct injection fuel system
- Electronic governor system
- Aksa AK 5280 alternator
- Brushless alternator design
- MX341 automatic voltage regulator
- Class H alternator insulation
- IP22 alternator protection
- DSE7320 control panel
- Integrated base fuel tank
- Open or canopy configuration
- Suitable for standby, prime, commercial, agricultural, site, and industrial power use
Technical summary
| Specification | Details |
|---|
| Manufacturer | AKSA Power Generation |
| Model | APD360C |
| Fuel type | Diesel |
| Standby power | 360 kVA / 288 kW |
| Prime power | 327 kVA / 261.6 kW |
| Voltage | 400/231V |
| Frequency | 50Hz |
| Phase | 3 Phase |
| Power factor | 0.8 |
| Standby current | 519.63 A |
| Engine | Cummins 6LTAA9.5-G1 |
| Engine speed | 1500rpm |
| Engine standby power | 320 kW / 429 HP |
| Engine prime power | 290 kW / 389 HP |
| Cylinders | 6 in-line |
| Displacement | 9.5 litres |
| Bore x stroke | 116.5 ? 148 mm |
| Compression ratio | 16.6:1 |
| Aspiration | Turbocharged and charge-air-cooled |
| Cooling | Water cooled |
| Governor | Electronic |
| Fuel consumption at full load | 70 L/hr |
| Fuel consumption at 75% load | 52 L/hr |
| Fuel consumption at 50% load | 35 L/hr |
| Fuel tank capacity | 470 L |
| Oil capacity | 32.4 L |
| Coolant capacity | 11.1 L engine only / 65.1 L total |
| Radiator cooling air | 708 m?/min |
| Engine air intake | 18.6 m?/min |
| Exhaust gas flow | 25 kg/min |
| Alternator | Aksa AK 5280 |
| Alternator power | 350 kVA |
| Alternator type | 4 pole, brushless |
| AVR | MX341 |
| Voltage regulation | 1% |
| Insulation class | Class H |
| Protection class | IP22 |
| Controller | DSE7320 |
| Canopy | MS 60 CK |
| Noise level | 89 dB(A) @ 1m / 78.5 dB(A) @ 7m |
| Open set dimensions | 2840 ? 1300 ? 1845 mm |
| Open set dry weight | 2750 kg |
| Open set fuel tank capacity | 470 L |
| Canopy dimensions | 3963 ? 1356 ? 2171 mm |
| Canopy dry weight | 3480 kg |
| Canopy fuel tank capacity | 470 L |
